MULTI MODULES
KNX products make areas more controllable, providing more time for fun.
Technical Information
BSMXX-16A-01
Power Supply :EIB Power Supply
Power Consumption :Maximum 0.3 W
Number of outputs : 8, 16, or 24
Output Current : 16A@250VAC, 80A inrush
Mode of commissioning :S-Mode
Type of Inputs : Dry Contact Inputs
Type of protection :IP 20)
Temperature Range : Operation (- 10°C ?70 °C)
Storage : (- 25°C ?100 °C)
Maximum air humidity : <90 RH
Flammability : Non-flammable product
Mounting:DIN Rail
Dimensions:8 outs: 105x90x65mm (WxHxD) ? 6 DIN units
16 outs: 171x90x64mm (WxHxD) ? 10 DIN units
24 outs: 247x90x64mm (WxHxD) ? 15 DIN units
Certification:EIB-Certified
POWER SUPPLY
It is a efficiency and energy saving switching Power Supply with features of high efficiency,
low noise, light weight, small size, high reliability, strong anti-interference and so on.
Technical Information
BSP640-01
Operation temperature: －5℃～＋45℃
Storage temperature: －25℃～＋55℃
Design: modular
Housing: flame retardant plastic
Installation: DIN rail 35mm
Dimension: 144mm*65mm*90mm（W*D*H）
KNX IP
The new compact design has a width of only 1 module (18 mm) and is powered by the KNX bus.
Technical Information
KNX IP Interface C4
Mechanical Data
-
Housing: plastic
-
DIN rail mounted device
-
Width: 1 module (18 mm)
Controls and indicators
-
2 Buttons and 3 LEDs, multicolor
-
KNX programming button with LED
Ethernet
-
10BaseT
-
5 KNXnet/IP Tunneling connections
KNX
-
Medium IP/TP
Power supply
-
From KNX Bus, approx. 15 mA
Connectors
-
KNX Bus connector
-
LAN RJ-45 socket
Technical Information
KNX IP RTI
Mechanical Data
-
Housing: plastic (PC)
-
DIN rail mounted device, width: 1 unit (18mm)
-
Weight: approx. 40g
Controls and indicators
-
2 buttons and 3 LEDs (multicolor)
-
KNX programming button with LED (red)
Ethernet
-
10BaseT (10Mbit/s)
-
Supported internet protocols ARP, ICMP, IGMP, UDP/IP, TCP/IP, DHCP and Auto IP
-
Up to 5 KNXnet/IP Tunelling connections simultaneously
-
KNX BAOS Binary Protocol V2.0
-
KNX BAOS Web Services (JSON)
KNX
-
Medium TP
-
Device Model System B
-
Max. Communication Objects: 250
Power supply
-
KNX Bus approx. 15 mA
Connectors
-
Bus connector for KNX (red/black)
-
LAN RJ-45 socket
Dimmer Actuator
The BSmart Dimmer actuator with Relay is a KNX certified device available with 2 channels.
Technical Information
BSD02-01
Power supply：
Operating voltage： 21-30V DC，make available by the bus
Input Voltage： 230 V AC（50/60Hz)
Dimming operation mode：Leading edge（SCR）
Load type: Incandescent, Halogen
Note：It is however not permitted to connect inductive and capacitive loads together at the same output, but connect resistive loads with one of both.
KNX Motion Sensor
KNX Motion Sensor,PIR+LUX
Technical Information
BSMS-01
Power Supply:
Operating Voltage: 21-30V DC，made available by the EIB-BUS
Base on the KNX/EIB protocol, the detect are the ceiling installation devices, with motion, microwave, and lux detect for selection.
The motion and lux sensor is a device can detect the external signal, physical condition (e.g. light, movement), and transmission the information to other device, such as dimmers and relays to achieve its function.
They are used for illumination, i.e. the case on brightness, or the needs to monitor the case, i.e. monitors whether an infrared object is moving, and then perform an action.